Health check
The health check finds the Google Ads settings that show your ads to people who will never buy, says what each one cost over the last 30 days by Google's own report, and fixes the ones it can with a change you can undo.
Most of the budget a store can stop losing on Google Ads is not fraud. It is settings left at Google's defaults: ads shown to people outside the area you sell to, on partner sites and on banner ads across the web. Google charges for those clicks like any other and never refunds them, because to Google they are valid.
Open it from Ad accounts: every protected Google Ads account shows a pill such as "2 leaks · about R1,240/mo" or "No leaks found". The pill opens the account's health page.
What it checks#
| Check | What it looks for | What it counts | The fix |
|---|---|---|---|
| Ads reach people outside your area | Enabled campaigns whose location option is "Presence or interest" | What people outside your targeted locations cost | Show ads only to people in or regularly in your locations ("Presence") |
| Search partners cost more per sale | Search campaigns with Google search partners switched on | What partners cost above Google Search for the same conversions | Switch search partners off |
| Search budget goes to display ads | Search campaigns that also run on the Display Network | The same rule, on Display cost | Switch the Display Network off |
| Junk placements are still running | Apps and sites the Placements view calls junk and you have not excluded | Their Google cost | Exclude them on the Placements page |
| Performance Max spends where nothing converts | A Performance Max channel with a tenth or more of the campaign's spend and no conversions | Its cost, for information | None: Google has no channel switch for Performance Max |
Performance Max cannot switch off search partners, so the search partners check leaves it out. Its channels are shown for information and are not in the total.
A placement counts as junk when at least three of its clicks reached Spurn and half or more were invalid, or when Google counted 20 or more clicks from it and no conversions.
How the money is worked out#
- The window is the last 30 complete days in the ad account's time zone, ending yesterday. The page calls that "about X a month": it is an estimate of a month, not your bill.
- The figures are Google's own, from its reports for the account, in the account's currency. Spurn never converts currencies.
- Outside your area is the cost Google reports for people who were not physically in a targeted location (its user location report).
- Search partners and the Display Network only count as a leak where they convert worse than Google Search on the same campaign. Spurn works out what Google Search would have charged for the conversions the partners brought, at the campaign's own cost per conversion, and counts the rest. If they brought no conversions, all of their cost counts. If they convert as cheaply as Google Search or better, nothing counts and the campaign is not listed.
- A campaign that cost nothing on a check over the window is not listed.
An example: a Search campaign spent R1,000 on Google Search for 10 conversions (R100 each) and R600 on search partners for 2 conversions. At Google Search's cost, those 2 would have cost R200, so the partners leaked R400.
The account's total is "Leaking about X a month": the sum of every open finding, without Performance Max channels and without anything you dismissed or fixed.
Fix#
Fix opens a confirmation that lists every campaign it changes, with the exact change (for example "On → Off") and what that campaign leaked. Nothing changes until you confirm.
When you confirm, Spurn reads each campaign from Google Ads again, changes only the ones still on the leaking value, and sends one change to Google for the lot. It changes the one setting and nothing else. A campaign someone already changed is skipped, and a campaign Google refuses is listed with Google's reason.
Each change is recorded under Fixed by Spurn: the campaign, the setting before and after, the monthly figure and when. It is also in the workspace's audit log.
Only owners and admins can fix settings, on Starter and up (the plans with automatic blocking). They can undo a fix on any plan.
Undo#
Undo puts back the value the setting had before Spurn's fix. Before it sends anything, Spurn reads the campaign from Google Ads: if someone changed the setting there since, the confirmation says so, and Undo still restores what Spurn recorded.
The record stays after an undo, marked as undone. Spurn then checks the account again, so the finding returns with today's figures.
Dismiss#
Dismiss hides a finding you chose on purpose, such as a campaign meant to reach people planning a trip to your area. A dismissed finding moves to Dismissed, out of the total, and Restore brings it back. Spurn keeps checking it. A new campaign with the same setting shows up as a new finding.
When it runs#
- Every day for each protected Google Ads account.
- Check again asks for a fresh check. The page says "Checking now" and updates when it finishes, usually within a minute. After a check that did not finish, wait ten minutes before asking again; Spurn retries on its own meanwhile. When Google Ads asks Spurn to slow down, Spurn waits as long as Google says.
- A failed check keeps the last good result on the page and says why the check did not finish. Spurn tries again on its own.
On the overview#
When any account in view has open findings, the overview shows a card such as "Settings are leaking about R2,100 a month", with the costliest finding and a link to fix it. It is hidden when nothing is found.
The overview's Prevented (estimate) figure counts each fix's monthly figure for the days since the fix, until it is undone. It is an estimate: the figure is what the setting cost in the 30 days before the fix.
Plans#
| Free | Starter | Growth | Pro | Agency | |
|---|---|---|---|---|---|
| Health check and its findings | ✓ | ✓ | ✓ | ✓ | ✓ |
| Fix | – | ✓ | ✓ | ✓ | ✓ |
| Undo a fix | ✓ | ✓ | ✓ | ✓ | ✓ |
| Excluding junk placements | – | – | – | ✓ | ✓ |
The check is on every plan, because it shows what Spurn saves you before you pay for anything. Undo is on every plan too: it only puts back your own setting, so a downgrade never leaves you stuck with a change Spurn made.
Good to know#
- Google can switch a setting back. Google's automatically applied recommendations include "Expand your reach with Google search partners" and "Expand your reach with the Google Display Network". If they are on, Google may undo a fix. Turn them off under Recommendations, then Auto-apply, in Google Ads. If a setting is changed back, the next daily check shows it under Fixed by Spurn as "Changed back in Google Ads", and the finding returns.
- Not every click from outside your area is waste. Hotels, tour operators and anyone selling to people who are travelling may want "Presence or interest". Check the conversions on each campaign before you fix it, and dismiss the finding if the setting is on purpose.
- It reads, then waits for you. The check only reads the account. Nothing changes in Google Ads unless you click Fix or Undo.
- Google Ads only, for now. Microsoft Advertising and Meta settings are not checked yet. Spurn does not add negative keywords for you: blanket negative lists risk blocking real searches.